1 d

It places the oil filter in an eas?

We did have the coolant level sensor recall done by Ford at 49k miles back in early 2018. ?

fill up radiator with water till full blow into radiator filler neck till water comes out of engine bleeder port. Oil looks clean, the oil in the coolant seems more than just some residual from seepage or machine work residue. If you are sure the head gasket is OK, The next most likely culprit would be the oil cooler on the n/s of the engine, which co-incidentally is right next to the expansion tank, so maybe that is the cause. we ran it for 200,000, then oil in the coolant. hot deepthroat The head gasket seals both coolant and lube oil galleries in the head/block interface. Of course, this is far from an exhaust list of the problems that may occur on the BMW N62 engine. 3) Drain the coolant. Replace old and tired coolant hoses with OEM cooling hoses or quality aftermarket options to save some money. He thinks it only has a couple of hundred miles on the new engine. best lsa camshaft to/2YxL2F9 How to fix the oil in the coolant issue. iTrader: ( 1) Help: Oil in Coolant / Overheating Issue. The main job of the cooling fan is to draw ambient air across the cooling fins of the radiator to lower engine coolant temperatures. On some engines coolant as well as engine oil run through the housing passages, sometimes to coolant hoses. james pitaro When replacing your oil cooler, work with the engine cold and disconnect the battery negative cable. ….

Post Opinion